This 200AMP DC Inverter MMA ARC Welding Welder features strong compensation for wire netting against voltage vibration of the power source. With Fine arc force adjustment that can prevent electrode sticking, this welder adopts IGBT inverter technology, brief and easy electronic circuit, compact, light and energy-saving

Features:

• Advanced control technology meets various welding applications and greatly improves the welding performance. Welder can be widely used in acid and basic electrode welding
• Advanced IGBT Inverter Technology-High inverter frequency greatly reduces the volume & weight of the welder. Great reduction in magnetic & resistance loss obviously enhances the welding efficiency & energy saving effect. Switching frequency is beyond audio range, which almost eliminates noise pollution
• Adjustable Current-Adjustable output current, 30-200 Amp accords with different welding thickness by pressing or turning the knob, this ARC electric welder with a clear LED screen to display output current
• Efficiency, energy saving, portable, stable arc, high no-load voltage, and with good compensation of arc force, are able to meet various welding requirements in field work
• 3 Level Protection-To protect the welder, it has over-heat protection, over-pressure protection, over-current protection with heat dissipation design. CE certification
• Description:rnFlow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi.rn>rnFeatures:rnThe output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon,helium, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.rn>rnSpecifications:rnA very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4" barbed fitting.If you have a Miller, Lincoln, or Hobartwelder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut."}" data-sheets-userformat="{"2":15233,"3":{"1":0},"10":2,"11":0,"12":0,"14":[null,2,0],"15":"Calibri, sans-serif","16":11}">Output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon,helium, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.
• Description:rnFlow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi.rn>rnFeatures:rnThe output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon,helium, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.rn>rnSpecifications:rnA very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4" barbed fitting.If you have a Miller, Lincoln, or Hobartwelder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut."}" data-sheets-userformat="{"2":15233,"3":{"1":0},"10":2,"11":0,"12":0,"14":[null,2,0],"15":"Calibri, sans-serif","16":11}">Outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4" barbed fitting.If you have a Miller, Lincoln, or Hobartwelder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut.

Specifications:

• Usable electrode: (MM)1.6-4 mm
• Description:rnFlow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi.rn>rnFeatures:rnThe output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon,helium, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.rn>rnSpecifications:rnA very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4" barbed fitting.If you have a Miller, Lincoln, or Hobartwelder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut."}" data-sheets-userformat="{"2":15233,"3":{"1":0},"10":2,"11":0,"12":0,"14":[null,2,0],"15":"Calibri, sans-serif","16":11}">Argon CO2 Mig Tig Flow meter Welding Regulator Gauge CGA
  
• Description:rnFlow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi.rn>rnFeatures:rnThe output flow is adjustable from 0- to 25 lpm, and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum.The fitting is a CGA-580 fitting, so it fits all argon,helium, nitrogen, and argon/CO2 mixed gas tanks.This does not fit CO2 cylinders.If you want a CO2 Flowmeter see our auction for those.rn>rnSpecifications:rnA very nice thing about this Flow meter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.You can see the adapter in the picture.It comes with a standard 1/4" barbed fitting.If you have a Miller, Lincoln, or Hobartwelder, the gas hose from your machine should screw right in, as they should use the 5/8" x 18 male nut."}" data-sheets-userformat="{"2":15233,"3":{"1":0},"10":2,"11":0,"12":0,"14":[null,2,0],"15":"Calibri, sans-serif","16":11}">Flow Meters are more accurate than the flow gauge regulators.The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi.
• Rated Input Voltage: 220
• Rated Frequency: 50/60hz
• Rated Input Current: 32amp
• Efficiency: 85%
• No-load Voltage: 56v
• Welding Current: 30-200amp
• Rated Input Volt: 27v
• Rated Duty Cycle: 60%