Factory-Direct Free Shipping within 72 hours.  
In-Stock items ship direct from our Rialto, CA. Store within 24 hrs. 

This high pressure pump has a maximum intermittent discharge pressure of 2000 PSI and flows at a max rate of 40 GPM. Appropriate for reclaimed water applications.

• Spheroidal cast iron crankcase with sight glass and vented dipstick
• Forged, through-hardened, ground and polished crankshaft
• Bronze connecting rods; hardened stainless steel plunger bases
• Solid ceramic plungers
• Nitrile seals with fabric reinforcing
• Stainless steel valves and cast aluminum bronze manifold
• Use for reclaimed water

Specifications:

• Volume (Continuous) .................................... 35.4 GPM ....................... (134 l/m)
• Volume (Intermittent) .................................... 40 GPM .......................... (151.4 l/m)
• Discharge Pressure (Continuous)................ 1300 PSI ......................... (90 Bar)
• Discharge Pressure (Intermittent) ................ 2000 PSI ......................... (138 Bar)
• Inlet Pressure ............................................... Up to 90 PSI ................... (Up to 6.2 Bar)
• Speed (Continuous) .............................................................................. Up to 800 RPM*
• Speed (Intermittent) ............................................................................... Up to 885 RPM**
• Plunger Diameter.......................................... 1.65” ............................... (42 mm)
• Stroke ........................................................... 1.65” ............................... (42 mm)
• Crankcase Oil Capacity ............................... 116 fl.oz. ......................... (3.43 liters)
• Temperature of Pumped Fluids .................... Up to 140 Degrees F..................... (Up to 60ºC)
• Inlet Ports .............................................................................................. 2 x 1-1/2" NPT
• Discharge Ports .................................................................................... 2 x 1" NPT
• Crankshaft Mounting ............................................................................. Right
• Shaft Rotation ............................................... Top of Pulley Towards Fluid End
• Weight .......................................................... 125 lbs. ........................... (57 Kg)
• Crankshaft Diameter .................................... 1.38” ............................... (35 mm)
• Valve Casing - LP122A ......................................................................... Aluminum Bronze
• Valve Casing - LP123 ........................................................................... Brass
• Valve Casing - LP122A-4000 ................................................................ 303 S.S.
• Volumetric Efficiency @ 800 RPM ........................................................ 0.96
• Mechanical Efficiency @ 800 RPM ....................................................... 0.85