SunGoldPower Plasma Cutter Non Touch Pilot Arc 50A
Non-touch Pilot Arc: it efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag; the technology allows you to cut without touching the tip to the metal. It provides a better cutting quality and longer consumable life.
- Lower Frequency Advanced Inverter IGBT Technology.
- Non-touch Pilot Arc torch allow you to cut without touching the tip to the metal.
- The air regulator and water trap is a combined unit mounted on the back machine, reduce the chance of water entering the plasma torch.
- Voltage 110/220V Available, Duty Cycle Cycle 60% at 50 Amps.
- 2T/4T Function enabled. Operating procedure using the 2T / 4T Function with torch.
- Cutting Thickness: Max Rated Clean Cut Thickness: 1/2".Max Severance Thickness: 3/4.
- Outstanding cutting performance. Especially suitable for cutting carbon steel, stainless steel, aluminum and copper.
- 1 X 50A Plasma Cutter
- 1 X IPT40 Model Cutting Torch
- 1 X Air Regulator
- 2 X Plasma Cutter Tips
- 1 X Musk & Electrode
- 5 feet Ground Clamp & Cable